Storage :)

Computer data storage, often called storage or memory, refers to computer components and recording media that retain digital data. Data storage is a core function and fundamental component of computers.

In contemporary usage, 'memory' usually refers to semiconductor storage read-write random-accses memory, typically DRAM (Dynamic-RAM). Memory can refer to other forms of fast but temporary storage. Storage refers to storage devices and their media not directly accessible by the CPU, (secondary or tertiary storage), typically hard disk drives, optical disk drives, and other devices slower than RAM but are non-volatile (retaining contents when powered down).^[ Historically, memory has been called core, main memory, real storage or internal memory while storage devices have been referred to as secondary storage, external memory or auxiliary/peripheral storage.

The distinctions are fundamental to the architecture of computers. The distinctions also reflect an important and significant technical difference between memory and mass storage devices, which has been blurred by the historical usage of the term storage. Nevertheless, this article uses the traditional nomenclature.

Many different forms of storage, based on various natural phenomena, have been invented. So far, no practical universal storage medium exists, and all forms of storage have some drawbacks. Therefore a computer system usually contains several kinds of storage, each with an individual purpose.

A modern digital computer represents data using the binary numeral system. Text, numbers, pictures, audio, and nearly any other form of information can be converted into a string of bits, or binary digits, each of which has a value of 1 or 0. The most common unit of storage is the byte, equal to 8 bits. A piece of information can be handled by any computer or device whose storage space is large enough to accommodate the binary representation of the piece of information, or simply data. For example, the complete works of Shakespears, about 1250 pages in print, can be stored in about five megabytes(forty million bits) with one byte per character.

The defining component of a computer is the cenral processing unit (CPU, or simply processor), because it operates on data, performs calculations (computes), and controls other components. In the most commonly computer architecture, the CPU consists of two main parts: Control unit and Arithmetic Logic Unit. (ALU). The former controls the flow of data between the CPU and memory; the latter performs arithmetic and logical operations on data.

Without a significant amount of memory, a computer would merely be able to perform fixed operations and immediately output the result. It would have to be reconfigured to change its behavior. This is acceptable for devices such as desk calculatorscalculators, digital signal processor, and other specialised devices. Von Neumann machines differ in having a memory in which they store their operating instructions  and data. Such computers are more versatile in that they do not need to have their hardware reconfigured for each new program, but can simply be reprogammed with new in-memory instructions; they also tend to be simpler to design, in that a relatively simple processor may keep state between successive computations to build up complex procedural results. Most modern computers are von Neumann machines.

In practice, almost all computers use a variety of memory types, organized in a storage hierarchy  around the CPU, as a trade-off between performance and cost. Generally, the lower a storage is in the hierarchy, the lesser its bandwidth and the greater its access latency  is from the CPU. This traditional division of storage to primary, secondary, tertiary and off-line storage is also guided by cost per bit.